wired up another module. Reinforced one of the edging. I'm not totally sure how I'm going to pull off power. I may have a PSU on each side I'm thinking. Now how do I protect them from liquid beverages and overheating at the same time? They need ventilation.

I'm thinking having them only half exposed against the wall. This gives them some air yet the wall protects them to a degree.

I also moved one of two couches back into place.

My knees can't handle all this abuse right now. I'm thinking tomorrow I'm going to have to get some advil from or something since I still need to wire in the USB / power cords, tight up / tweak the LED light placements, install foil on the floor, actually wire the boards up to the LEDs, repair 3 wires, and run the last 64 wires ... in no particular order.

The proper order should be

1. run the last 64 wires
2. Make the last raised floor
3. Create area for PSU's
4. run power cords
5. run the usb cords
6. wire up two modules
7. run test
8. tweak (maybe repeat)
9. wire up rest
10. add in foil

What I'm thinking is I'll get the foil mid day from Jewel (and advil). Be a nice break. Like beer.